SunSDR2PRO

HF and VHF in a case that weighs a kilo and a half.

SunSDR2PRO — Вид спереди

01 / 04 — Вид спереди

Direct sampling on receive (DDC) and direct digital synthesis on transmit (DUC). 15 W (up to 20) on HF, 15 W on 6 m and up to 8 W on 2 m, in a 185 × 165 × 50 mm case with a one-piece milled heatsink.

HF
15W
VHF
7W
ADC
16bit
Weight
1.5kg

$1,640

Find a dealerSpecifications

Features

Contests and SO2R

Two independent software receivers, each with a sub-receiver: two HF bands at once and split in DX mode. With ExtCtrl the compact unit becomes a complete contest position.

Home shack and field

130 dB dynamic range on HF and 114 dB on VHF, 0.2 µV sensitivity and a +10 dB preamp keep you confident on a crowded band.

Field power

10–16 V on receive and 12–16 V on transmit: a switching supply or a battery will do.

2 m VHF and transverters

A built-in +22 dB VHF LNA and transverter support. With an external amplifier the PRO runs the whole set-up, and the kit stays portable.

Use Cases

  • 01

    Contesting

    Two independent receivers allow SO2R operation and hunting multipliers on the second VFO.

  • 02

    DX Hunting

    Wide panorama and instant split frequency jump give an edge in dense pileups.

  • 03

    Remote Operation

    Streaming audio and IQ over the network enables full remote operation worldwide.

  • 04

    Digital Modes (FT8/FT4)

    Direct integration with WSJT-X and loggers via TCI protocol with no virtual cables.

ExpertSDR3, TCI and ERS

Free ExpertSDR3 with free updates. The open TCI protocol connects loggers, skimmers and digital-mode programs without virtual COM ports or audio cables; programs without TCI use the RadioSync bridge (CAT, OmniRig). Expert Remote System (ERS) is included: control from a browser or ExpertSDR3, directly or through the ExpertCloud service.

About the software
  • ExpertSDR3Free software for operating on the air
  • TCIAn open protocol for loggers, skimmers and digital modes
  • ERSRemote operation from a browser or ExpertSDR3

Hardware headroom

  • ALC*

    Input for external power amplifiers, controlled over ExtCtrl.

  • Full Duplex*

    Full-duplex operation.

* The hardware supports these functions; software support comes in ExpertSDR3 updates.

SpecificationsSunSDR2PRO

Receiver Characteristics

Receiver Characteristics
RF ADC, resolution16 bit
RF ADC, sampling rate160 MHz
ADC typeLTC2209
RX Frequency range0.1...65; 95...155 MHz
Sub-receivers2 pcs
Sample rate39; 78; 156; 312 @ 24 kHz

See all specifications for details

Receiver Characteristics
Receiver Characteristics

Transmitter Characteristics

Transmitter Characteristics
RF DAC, resolution14 bit
RF DAC, sampling rate640 MHz
TX Frequency range160-6; 2 M
Output power on HF15 (up to 20) W
Output power on 6M15 W
Output power on VHF7 (up to 8) W

See all specifications for details

Transmitter Characteristics
Transmitter Characteristics

Specifications

Specifications
Local oscillator TCXO, accuracy20 +/- 0.5 ppm
External 10 MHz oscillator inputYes
Built-in audio codec / Dynamic Range24 bit/dB
RF input/output2 HF, 1 VHF, ADC IN, DAC OUT
PC interfaceLAN 100 Mbps Mbit
DC voltage range in RX/TX10...16 / 12...16 V

See all specifications for details

Specifications
Specifications

Documentation and package contents

Bought together.

Also considerSunSDR2DXIf you need 100 W on HF without an external amplifier.SunSDR2DX
Expert Electronics

We design and manufacture SDR transceivers, receivers and software for radio amateurs.

© 2026 Expert Group LLC