ColibriDDC
Two receivers in a palm-sized case.
01 / 09 — КолибриДДС — согласованный чёрный ракурс
A compact HF receiver with direct down-conversion (DDC) on a 14-bit ADC: 0.1–55 MHz, and up to 800 MHz in undersampling mode. IQ recording up to 312 kHz wide, in a 125 × 65 × 26 mm case.
- ADC
- 14bit
- receivers
- 2+2
- ADC
- 125MHz
- weight
- 160g
$450$500
Features
Lab and research
Undersampling receives signals above the ADC range, and IQ recordings are kept for analysis. Several receivers can run at once.
A receive site with a quiet band
Put the receiver where the band is quiet, at a country house away from city noise. The remote ColibriDDC receives, your home transceiver transmits.
RBN nodes
Four independent slices and data over TCI have made ColibriDDC a popular receiver for RBN skimmer nodes.
Direct headphone output
A built-in 24-bit audio codec feeds headphones directly.
Use Cases
- 01
Contest Skimmer Station
Continuous automated monitoring and CW/digital skimmer decoding across multiple bands.
- 02
Remote Listening Post
Install at an electrically quiet rural location and listen from your city apartment.
- 03
SDR Panadapter
Direct integration with external transceivers as a high-performance second receiver.
ExpertSDR3, TCI and ERS
Free ExpertSDR3 with free updates. The open TCI protocol connects loggers, skimmers and digital-mode programs without virtual COM ports or audio cables; programs without TCI use the RadioSync bridge (CAT, OmniRig). Expert Remote System (ERS) is included: control from a browser or ExpertSDR3, directly or through the ExpertCloud service.
About the software- ExpertSDR3Free software for operating on the air
- TCIAn open protocol for loggers, skimmers and digital modes
- ERSRemote operation from a browser or ExpertSDR3
SpecificationsColibriDDC
Receiver Characteristics
| HF receiver filters | ФНЧ: 55 MHz |
|---|---|
| RF ADC, resolution | 14 bit |
| ADC type | ADS4145 |
| RX Frequency range | 0.1...55 MHz |
| Sample rate | 39; 78; 156; 312 @ 24 kHz |
| RX in Nyiquist zones | 0.1...800 MHz |
See all specifications for details
Specifications
| Local oscillator TCXO, frequency | 20 MHz |
|---|---|
| Local oscillator TCXO, accuracy | ±0.5 ppm |
| External 10 MHz oscillator input | Yes |
| Built-in audio codec / Dynamic Range | 24 bit/dB |
| RF input/output | 1 SMA |
| PC interface | LAN 100 Mbps Mbit |
See all specifications for details
Optional BPF-kit board with HF octave band filters
| 160M | 1.73 - 2.6 MHz |
|---|---|
| 80M | 2.6 - 4.3 MHz |
| 60M | 4.3 - 6.5 MHz |
| 40M | 6.5 - 7.9 MHz |
| 30M | 7.9 - 13.0 MHz |
| 20M | 13.0 - 15.9 MHz |
See all specifications for details
Documentation and package contents
Bought together.
SMA to HF (PL259)
Use this adapter to connect an antenna to ColibriDDC or ColibriNANO receiver.
- Length
- 0.3m
- Connector 1
- SMA
- Connector 2
- PL259
E-Coder Mini
This radio kit is a control panel for the E-Coder Mini SDR transceiver.
- Connection
- USB-B
- Opt. enc.
- 1
- Assembly
- DIY
Price on pre-orderFind a dealer
