ColibriNANO
A receiver the size of a flash drive.
DiscontinuedUSB SDR receiver
01 / 05 — Вид спереди
A 14-bit ADC, 0.1–55 MHz reception, up to 500 MHz in undersampling mode. 90 × 25 × 17 mm and 43 g; data and power over USB 2.0.
- ADC
- 14bit
- 2.0
- USB
- receivers
- 1+1
- weight
- 43g
Discontinued
No longer sold. The page stays for owners: specifications and software compatibility.
Features
In the field, on the road, next to a laptop
Take ColibriNANO with you and plug it into a laptop wherever you need to monitor the bands.
Panorama and IQ recording
- One software receiver with a sub-receiver.
- Panorama and IQ recording up to 3072 kHz wide.
- Nyquist-zone reception up to 500 MHz, with external band-pass filters.
Not only ExpertSDR3
ColibriNANO also works with HDSDR and SDRSharp through ExtIO.
Use Cases
- 01
Field Trips & Travel
Pack into your backpack with a wire antenna and listen to amateur radio from hotel rooms or nature.
- 02
IF Panadapter
Add a real-time waterfall and spectrum display to an analog desktop transceiver using an IF output.
- 03
TCI Integration
Automated frequency sync with loggers and SDR software over the open TCI protocol.
ExpertSDR3, TCI and ERS
Free ExpertSDR3 with free updates. The open TCI protocol connects loggers, skimmers and digital-mode programs without virtual COM ports or audio cables; programs without TCI use the RadioSync bridge (CAT, OmniRig). Expert Remote System (ERS) is included: control from a browser or ExpertSDR3, directly or through the ExpertCloud service.
About the software- ExpertSDR3Free software for operating on the air
- TCIAn open protocol for loggers, skimmers and digital modes
- ERSRemote operation from a browser or ExpertSDR3
SpecificationsColibriNANO
Receiver Characteristics
| HF receiver filters | LPF: 55 MHz |
|---|---|
| RF ADC, resolution | 14 bit |
| ADC type | ADS4145 |
| RX Frequency range | 0.1...55 MHz |
| Sample rate | 48; 96; 192; 384; 768 @ 24 1536; 1920; 2560; 3072 @ 16 kHz |
| RX in Nyiquist zones | 0.1...500 MHz |
See all specifications for details
Specifications
| BDR on HF dB | 110 |
|---|---|
| PC connection type | USB 2.0 |
| Maximum voltage at the antenna input without ADC overload | 74 (Pk-Pk); 32.7 (RMS) mV (ATT=0 dB) |
| Receiver temperature during operation | +45...+55 °C |
| RF input with ESD protection up to 15kV | 1 SMA connector 1 SMA connector |
| Self-noise level | 1.9 MHz (160M) - 131 7.1 MHz (40M) - 130 52.5 MHz (6M) - 127 dBm |
See all specifications for details
